Hans schmidt Vietnam - Tension Meter Model SFZ - Thiết bị tự động hóa công nghiệp

Hổ trợ trực tuyến


dieu.ans@ansvietnam.com
Ms Diệu: 0902.337.066

Menu sản phẩm

Ứng dụng

Hãng sản xuất

Lượt truy cập

	Đang online	139
	Lượt truy cập	5281635

Hans schmidt Vietnam - Tension Meter Model SFZ

Loại sản phẩm: Meters

Mã sản phẩm: Tension Meter Model SFZ

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

8 tension ranges from 0 - 10 N up to 0 - 2000 N

For measuring the tension of running wires, fibre optics, cables, ropes, slim tapes and foils

Single roller tension sensor for installation at an existing deflection pully

Tension sensor SFZ for measuring wires, cables, ropes, tapes usw.

Tension sensor SFZ Conformitï¿½ Europï¿½enne

Model Information

» Calculation of the Tension Range

» Display Units and Amplifier

Print version

Special Features

top

Precision DMS sensor with best accuracy
Direct, axial force application
High overload proctection (max. 10 times of nominal force)
Easy mounting by using mechanical stops and limited space requirements
The progressively adjustable axial mounting depth using a drill hole (Ø 30 mm), enables acurate positioning of the roller depanding on the material path
Easy mounting by rollers provided by the customer
Required power supply 10 V DC regulated
Output signal mV/V
Connection to an external amplifier is recommended
IP 67 (dust tight and ingress of water) protected, optional IP 54

Standard Features

top

Rugged, stainless steel housing
Sensor with highly mechanical rigidity
Securely attached, shielded 5 m cable with open ends (longer cables at request)
Clamps version optional available
Supplied with a 5 m shielded cable with open ends (Optional length are available)

Available Models

top

Model	Nominal Force
SFZ-10	10 N
SFZ-20	20 N
SFZ-50	50 N
SFZ-100	100 N
SFZ-200	200 N
SFZ-500	500 N
SFZ-1000	1000 N
SFZ-2000	2000 N

Mounting

top

The sensor can be easily mounted everywhere a deviating point respectively a guide roller is built in at the machine. These places can be use as measuring point, assumed the in and outgoing angle is constant.

For mounting, the sensor can be clamped on each position of the cylinder. Alternativ a mounting flange or a clamping block is available (see additional Options)

Please click picture to see
installation suggestions sketch

Calculation of the Tension Range

top

The tension range can be calculated for every wrapping angle with this formula:

When selecting the nominal measurement force it is necessary to take into account the weight of the guide roll and raise the nominal load respectively, particularly when working with small nominal forces.

Axle Journal

top

Design	Axle diameter mm	Suitable bearing
A (standard)	10 f7	6000 / 6300
B	15 f7	6002 / 6302
C	17 f7	6003 / 6303

According to the application different bearing journals are available (standard: code A = 10 mm)
More information to the design see dimensions

Guide Rollers

top

Example for rolls, usable for tensions sensor SFZ

You can mount your own guide rollers or Schmidt rollers. A big number of rollers with different geometry and different materials are available on request - send us your demand profile

Cable Connection

top

Code T (standard)

Axial output with screwed cable gland.
cable length 5 m

Click picture for more information

Code N2

Axial output with straight plug connection M12
cable lenth 5 m

Click picture for more information

Code S2

Axial output with right-angled plug connection M12
cable lenth 5 m

Click picture for more information

Sensors of model SFD are available with longer cables on request.

Additional Options

top

Code R

Plug and cable gland code T, N2 and S2 are available with radial cable output.

Click picture for more information

Code P

Low-cost model of the sensor according to IP code 54, protected against dust in sufficient quantity and splash water

Mounting Flange

made of stainless steel for mounting the sensor. The flange can be positioned and clamped at any place of the sensor.
Order number: SFZ-AN

Click picture for more information

Clamping Block

made of aluminium alloy for mounting the sensor. The flange can be positioned and clamped at any place of the sensor.
Order number: SFZ-KB

Click picture for more information

Display Units and Amplifier

top

Here you can find the recommended display units and amplifiers

Ordering Example

top

So bestellen Sie richtig	Typ mit Mess- bereich		Design		Optionen		Bestell-Code
Bitte immer den kompletten Bestell-Code angeben, z. B.:	SFZ-500	+	A	+	N2R	=	SFZ-500-A-N2R

Delivery Includes

top

Force sensor with cable

Dimensions

top

For PDF-file please
click picture

Specifications

top

Tension range:	10 up to 2000 N - nominal load
Accuracy:	0.5 % nominal load
Max. applied force:	160 % of nominal load, overload protection afterwards
Overload:	10 times of nominal load, max. 3200 N (depending on measuring range)
Transverse force at the axle:	max. 100 % nominal load
Axle deflection:	approx. 0.5 mm
Measuring principle:	Strain gauge bridge
Output signal:	5 - 20 N: 1 mV/V from 50 N: 1.5 mV/V
Max. power supply:	10 V DC
Connecting cable:	5 m
Bridge resistor:	700 Ω
IP code:	IP67 (IP54 optional)
Temperature range:	10...70° C
Housing:	Stainless-steel
Weight, net (gross):	Approx. 1100 g (Approx. 1600 g) inclusive 5 m cable

Specifications subject to change without notice!

Sản phẩm liên quan

Hans schmidt Vietnam - Te ...

Metrix Vietnam - 6850-001 ...

Metrix Vietnam - VM2800 & ...

Metrix Vietnam - 5500 Por ...

Hans schmidt Vietnam - Mo ...

Hans schmidt Vietnam - To ...

Hans schmidt Vietnam - Un ...

Hans schmidt Vietnam - Be ...

Hans schmidt Vietnam - Te ...

Hans schmitd Vietnam - Te ...

Hans schmitd Vietnam - 4 ...

Hans schmidt Vietnam - Te ...

Hans schmitd Vietnam - Te ...

Hans Schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans Schmidt Vietnam - Te ...

Tension Meter DXP

Hans Schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans Schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans Schmidt Vietnam - Te ...

Hans-schmidt Vietnam - Te ...

Hans Schmidt Vietnam -Ten ...

Hans schmit Vietnam - Ten ...

Hans schimidt Vietnam - T ...

Hans Shmidt VietNam - Ten ...

Loại sản phẩm:	Meters
Mã sản phẩm:	Textil Moisture Meter DHT-1
Nhà cung cấp:	Anh Nghi Sơn
Xuất xứ:	chính hãng
Hãng sản xuất:	Hans schmidt
Giá:	Vui lòng liên hệ

Hans schmidt Vietnam - Tension Meter Model SFZ - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Menu sản phẩm

Ứng dụng

Hãng sản xuất

Lượt truy cập

Hans schmidt Vietnam - Tension Meter Model SFZ

Model Information

Special Features

Standard Features

Available Models

Mounting

Calculation of the Tension Range

Axle Journal

Guide Rollers

Cable Connection

Additional Options

Display Units and Amplifier

Ordering Example

Delivery Includes

Dimensions

Specifications

Sản phẩm liên quan

Hans schmidt Vietnam - Textil Moisture Meter DHT-1

Hans schmidt Vietnam - Textil Moisture Meter TEM I H&M Package

Hans schmidt Vietnam - Textile Moisture Meter Model TEM-I

Metrix Vietnam - 6850-001 Impact Meter

Metrix Vietnam - VM2800 & VM3800 Vibra-Check

Metrix Vietnam - 5500 Portable Vibration Meter

Hans schmidt Vietnam - Motorized Torque Stand MTS

Hans schmidt Vietnam - Torque Meter DTXS and DTXA

Hans schmidt Vietnam - Torque Meter HTGS and HTGA

Hans schmidt Vietnam - Universal Testing Machine ZPM

Hans schmidt Vietnam - Belt Tension Meter RTM-400

Hans schmidt Vietnam - Tension Meter DX2S

Hans schmidt Vietnam - Tension Meter MK

Hans schmidt Vietnam - Tension Meter Q Series

Hans schmidt Vietnam - Tension Meter CTM

Hans schmidt Vietnam - Tension Meter MST

Hans schmidt Vietnam - Tension Meter KXE

Hans schmidt Vietnam - Tension Meters DTBB, DTBX

Hans schmidt Vietnam - Tension Meters DTLB, DTLX

Hans schmidt Vietnam - Tension Meters DTFB, DTFX

Hans schmidt Vietnam - Tension Meters DTVB, DTVX

Hans schmidt Vietnam - Tension Meters DTEB, DTEX

Hans schmidt Vietnam - Tension Meter DTMB for EDM

Hans schmidt Vietnam - Tension Meter Model DTMB

Hans schmidt Vietnam - Tension Meter Model PT-100-L

Hans schmidt Vietnam - Tension Meter Model PT-100

Hans schmidt Vietnam - Tension Meter Models ETPB, ETPX

Hans schmidt Vietnam - Tension Meter Models ETB, ETX

Hans schmidt Vietnam - Tension Meter ZED

Hans schmidt Vietnam - Tension Meter ZE Series Tension Meter Model ZEF

Hans schmidt Vietnam - Tension Meter Model SCV-1

Hans schmidt Vietnam - Tension Meter Model SCD-1

Hans schmidt Vietnam - Tension Meter Model SC-PM

Hans schmidt Vietnam - Tension Meter Model SFK

Hans schmitd Vietnam - Tension Meter Model SFD

Hans schmitd Vietnam - 4 tension ranges from 0 - 10 N up to 0 - 100 N

Hans schmidt Vietnam - Tension Meter Model FSB1-422

Hans schmitd Vietnam - Tension Meter Model FSB1

Hans schmitd Vietnam - Tension Meter Model FSL

Hans Schmidt Vietnam - Tension Meter Model FSH

Hans schmidt Vietnam - Tension Meter Model FSP

Hans schmidt Vietnam - Tension Meter Model FS1

Hans schmidt Vietnam - Tension Meter Models MAZD, MBZD

Hans schmidt Vietnam - Tension Meter Models MAZF, MBZF

Hans schmidt Vietnam - Tension Meter Model TSB2

Hans schmidt Vietnam - Tension Meter Model TSB1

Hans schmidt Vietnam - Tension Meter Model TSF

Hans schmidt Vietnam - Tension Meter Model TSL

Hans schmidt Vietnam - Tension Meter Model TSW

Hans schmidt Vietnam - Tension Meter Model TSH

Hans schmidt Vietnam - Tension Meter Model TSP

Hans schmidt Vietnam - Tension Meter Model TS1

Hans Schmidt Vietnam - Tension Meter DXH

Tension Meter DXP

Hans Schmidt Vietnam - Tension Meter DXV

Hans Schmidt Vietnam - Tension Meter DXE

Hans Schmidt Vietnam - Tension Meter DXT