Hans schmidt Vietnam - Tension Meter Model FSB1-422 - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Special Features

 top

• Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting (mounting cut out: longhole R 19 mm, length 54 mm)

• Various roller widths from 7 mm up to 20 mm 
• Tension sensor with integrated microprocessor controlled measuring amplifier
• Digital output signal (RS 422) for connecting to a PC by using an adapter (RS 422 - RS 232)
• Can be connected to PLC controls with digital input
• Up to max. 32 sensors may be connected in one line
• Each sensor can individually be addressed and set up
• Simple connection to BUS-Systems using gateways
• Easy adjustment to customised material by operator
• Tension sensor with mechanical overload protection
• Control lamp shows operative mode availability

Standard Features

 top

• Tension sensor with Aluminium housing
• Power supply +15...24 V DC (regulated)
• Certificate of Compliance with the order 2.1 according EN 10204 is included
• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Other tension ranges available on request.
Other measuring units available, such as g or kg
* SCHMIDT calibration material depending on tension range and roller width
** Outside dimensions of front plate

Important for your order: Please specify model and roller width! 
Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Click the roller width, to get picture and drawing of the tape rollers 

*Other roller materials (nickel-plated steel or plastic), as well as special coatings (Code CF - for carbon fibre, 
  NAV optimized, Code KE - ceramic, Code AH - anti adhesive ) are available on request.