Hans Schmidt Vietnam - Tension Meter DXT - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Special Features

 top

• The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
• Tape rollers with contact surface from 7 mm up to 50 mm are available
• Dual-flanged outer guide rollers with various widths for better filament guide 
  (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller)
• Roller shifting mechanism ensure easy acquisition of the running material
• Built-in mounting holes permit fixed installation for online use
• Special finger support located on the rear side reduces the effort to move

• Calibration to customer supplied material is available

Standard Features

 top

• Everything in operator’s view: 
  - the guide rollers 
  - the measured material 
  - the readings
• Tape rollers, ball-bearing mounted
• Each instrument is individually calibrated for highest accuracy
• 41 mm Ø scale
• Tension meter with rugged aluminium housing
• Certificate of Compliance with the order 2.1 according EN 10204 is included
• Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Other tension ranges, measuring head widths and material path calibrations available on request. Other units of measure available - g or kg.
* SCHMIDT calibration material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers

Important for your order: Please specify model and roller width! 
Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scale is individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tension meters 

• calibrated to custom supplied material
• fine tuned to a specific tension range
• other units of measure such as g or kg

Click the roller width, to get picture and drawing of the tape rollers