Hans schmidt Vietnam - Shore Durometer SHTD - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Shore D hardness tester according DIN 53505, ISO 7619, ISO 868 and ASTM D 2240  

Compact durometer for fast measurements

• Compact hardness tester for fast measurements
• Measuring face 18 mm Ø

• Adjustable Min./Max. indicator marks to highlight the working range of the hardness tester
• Optionally available: Calibration certificate with calibration report

• Easy to use
• High repeatability
• Application range 10 - 90 Shore D units
• Certificate of Compliance with the order 2.1 according EN 10204 is included

For measuring the hardness, place the durometer vertical and shock-free on the material to be measured and press the housing down, until the measuring face rests on the sample.

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.

Model	Shore	Application
SHTD	Shore D	plastic and medium hard to hard rubber materials
		alternative
SHTA	Shore A	soft rubber, elastomers, natural rubber, soft PVC, leather, etc.	more

For PDF-file please
click picture

Indentor:	Tapered pin 30°,    1.25 mm Ø
Depth of indentation:	0 - 2.5 mm
Typical applications:	Hard rubber, rigid thermoplast, resopal, hard plastic materials
Accuracy:	± 1 hardness unit
Application range:	10 - 90 Shore D
Standard:	DIN 53505, ISO 7619, ISO 868, ASTM D 2240
Measuring spring force:	... 4,45 - 44,5 N
Scale diameter:	54 mm
Display range:	0 - 100 Shore D units
Working face:	18 mm Ø
Base plate:	24 mm Ø
Weight, net (gross):	Approx. 200 g (300 g)
Dimensions:	28 x 58 x 110 mm (LxWxH)