Hans schmidt Vietnam - Shore Durometer HPSD - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
dieu.ans@ansvietnam.com

Ms Diệu: 0902.337.066

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 65
Lượt truy cập 4585216

Hans schmidt Vietnam - Shore Durometer HPSD

Loại sản phẩm: Shore Durometer

Mã sản phẩm: Shore Durometer HPSD

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Durometer according to Shore for determining the indentation hardness of hard rubber, rigid thermoplast, resopal, hard plastic materials
 

Shore D hardness tester according DIN 53505, ISO 7619, ISO 868 and ASTM D 2240  

Durometer with large seating for accurate measuring
 

 

Special Features

  • The spring loaded outer ring assures a constant measuring pressure and eliminates false readings due to difference between operators
  • Flat bottom prevent tilting and improves the measuring accuracy
  • Working face 18 mm Ø
 

working face hardness tester HPSD
 

  • Adjustable Min./Max. indicator marks to highlight working range of the hardness tester
  • Optionally available: Calibration certificate with calibration report
 

Standard Features

  • Easy to use
  • High repeatability
  • Application range 10 - 90 Shore D units
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
 

Operation

For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.
 

General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the testmaterial has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
 

operation shore durometer HPSD
 

Available Models

Model Shore Application  
HPSD Shore D hard rubber, rigid thermoplast, resopal and hard plastic materials  
    alternative  
HPSA Shore A soft rubber, elastomers, natural rubber, soft PVC, leather, etc. more
HPSA-R..-M Shore A rubber coated rollers, rollers, and cots more
HPSB Shore B for harder material than Shore A more
HPSC Shore C medium hard rubber, elastomers and plastic more
HPSDO Shore DO plastic and medium hard to hard rubber materials more
HPS0 Shore O soft elastomers, soft elastic materials, medium fast textiles more
HSOAO Shore AO Foams, steering wheels and inner linings of motor vehicles more
 

Attachments and Accessories

Memory pointer Code M 
 

Memory pointer to capture and store value
(last or highest reading) during measuring.
Order code: e. g. HPSA-M

Test Stand 
 

Model PSHP for series measurements

  • Height adjustable 0 - 200 mm
  • Stroke lever action 40 mm
  • Various plates available optional

Click picture for more information

Control Ring  
 

To determine the displacement at 20 Shore
Order number: HP-P20

Click picture for more information

Control Rings 
 

To determine the displacement at 20, 40, 60 and 80 Shore. 
Includes a base disk as basis and an inspection certificate.
Order number: HP-P20-100

Click picture for more information

Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

 

scope of delivery hardness tester HPSD: Hardness tester with carrying case, Certificate of Compliance with the 
order 2.1 according EN 10204 free of charge, operating instructions in 
english or german as requested
 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Indentor:
Tapered pin 30°,    1.25 mm Ø
Depth of indentation: 0 - 2.5 mm
Typical applications: Hard rubber, rigid thermoplast, resopal, hard plastic materials
Accuracy: ± 1 hardness unit
Application range: 10 - 90 Shore D
Standard: DIN 53505, ISO 7619, ISO 868, ASTM D 2240
Measuring spring force: ... 4,45 - 44,5 N
Test pressure*: Approx. 50 N
Scale diameter: 54 mm
Display range: 0 - 100 Shore D units
Working face: 18 mm Ø
Base plate: 44.5 mm Ø
Weight, net (gross): Approx. 300 g (500 g)
Dimensions: 50 x 58 x 110 mm (LxWxH)

Sản phẩm liên quan

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...

Hans schmidt Vietnam - Sh ...