Hổ trợ trực tuyến
|
|
|
 dieu.ans@ansvietnam.com
|
|
 Ms Diệu: 0902.337.066 |
|
Menu sản phẩm
Ứng dụng
Hãng sản xuất
Lượt truy cập
|
Đang online | 382 |
|
Lượt truy cập | 5283206 |
Takuwa Vietnam - Synchro/Analog Converter (SLDC5C Series)
Loại sản phẩm: Synchronous Motor
Mã sản phẩm: Synchro/Analog Converter (SLDC5C Series)
Nhà cung cấp: Anh Nghi Sơn
Xuất Xứ: chính hãng
Hãng sản xuất: Takuwa
Giá : Vui lòng liên hệ
Synchro/Analog Converter (SLDC5C Series)
SLDC5C series is, a data converter from the synchro into the analog.
Features
- ・Suitable for syntonic speed control
- ・Compact size
- ・Easy zero adjustment by one touch button
- ・Function with upper limit, addition
Available sites
-
・Control for industrial equipment
Main Specification
| Power supply input | AC90～242V、50/60Hz | |
| Internal power consumption | 14VA or less | |
| Input | Signal | Synchro 3-wire signal MAX.AC90V、50/60Hz |
| Method of insulation | Transformer insulation | |
| Impedance | 100kΩ or more | |
| Follow-up speed | 100r/min | |
| Deviation voltage output Vε |
Voltage signal | DC0V～5V、DC0V～10V、DC0V～±5V、DC0V～±10V |
| （select from mode switch） | ||
| Accuracy | ±0.1%F.S（Span width 270°～360°） | |
| Temperature coefficient | ±0.005%F.S／℃（Span width 270°～360°） | |
| Load resistance | 3kΩ or more | |
| Output adjustment range | ±30°～ ±180°(at synchro angle) | |
| Speed control output Vo | Voltage signal | Vo=Vε＋Vs |
| Load resistance | 3kΩ or more | |
| Setting voltage input Vs | Setting voltage level | DC-10V～+10V |
| Input impedance | 3kΩ or more | |
| Comparison signal output |
Output form | No voltage "a" contact (Photo MOS relay output) |
| Output rating | 50V（AC／DC）、0.1A | |
| Logic | “feasible”＝ON, “Not feasible”＝OFF | |
| Present value correction function | Function | The deviation voltage output Vε at an arbitrary position can be adjusted to the correct (preset corrected position) ・Dedicated to zero point correction 1 point (correction by means of the front zero adjustment switch) ・Arbitrary position correction 1 point (correction by means of external correction input) |
| Correction range | -180.00°～ 179.91°(at synchro angle) | |
| External correction signal input | No voltage contact signal or open collector input signal | |
| Vcc＝+12V、IF＝2mA（typ） | ||
| Forward/Reverse switching function | Function | To invert the polarity of the deviation voltage output Vε |
| Signal input | No voltage contact signal or open collector input signal | |
| Vcc＝+12V、IF＝2mA（typ） | ||
| Insulation resistance | Between power supply input terminals R1/R2 connected together and FG: 500 VDC; 10 MΩ or more when using an insulation resistance meter | |
| Dielectric strength voltage | Between power supply input terminals R1/R2 connected together and FG: 1500 VAC for 1 minute | |
| Ambient operating temperature | 0℃～+55℃ | |
| Ambient operating humidity | 30 ～ 90%RH; there shall be no condensation. | |
| Vibration resistance | Compliant with JIS C 60068-2-6 | |
| (20 m/s2, 10 ～ 55 Hz; 10 times in each axial direction) | ||
| Shock resistance | Compliant with JIS C 60068-2-27 | |
| (150 m/s2, 11ms; for each axis, 3 times each in both directions) | ||
| Painting | Munsell N1.5 half gloss | |
| External dimensions | 136mm(H)×72mm(W)×110mm(D) | |
| Weight | 2.0kg以下 | |
