Hans schmidt Vietnam - Force Gauges Model DS2 - - Thiết bị tự động hóa công nghiệp - ANS Vietnam

Hổ trợ trực tuyến

Click here to chat Skype Me™!
dieu.ans@ansvietnam.com

Ms Diệu: 0902.337.066

Menu sản phẩm

Hãng sản xuất

Lượt truy cập

Đang online 130
Lượt truy cập 4587106

Hans schmidt Vietnam - Force Gauges Model DS2

Loại sản phẩm: Force Gauge and Test Stands

Mã sản phẩm: Force Gauges Model DS2

Nhà cung cấp: Anh Nghi Sơn

Xuất Xứ: chính hãng

Hãng sản xuất: Hans schmidt

Giá : Vui lòng liên hệ

Capacity from 0 - 2 N up to 0 - 1000 N

 

Digital force gauge for determination of compression and tension forces, usable for numerous applications in a lot of sectors of industry
 

Force measuring unit with RS 232, Digimatic and analog output signal 

Low cost standard model for compression and tension forces
 

 

Special Features

  • 2 operation modes:
    real time - display the actual tension or compression force
    peak force - to measure the peak force during a test
  • Force measuring device with high sampling rate of 1000 times/sec to measure the peak force during a test switchable to 30 times/sec for applications with slow-changing forces or for damping forces, beeing influenced by vibrations.
  • Display update time 10 mal/sec
  • Output signal:
    - RS 232 C for connecting to a PC
    - analog ±1V DC
    - Mitutoyo Digimatic e. g. for connecting to a printer
  • Force gauge with user switchable units: N, gf (kgf) und ozf (lbf)
  • Programmable high/low set-points for go/no-go testing:
    Display: underrun (-)  -  good (O)  -  exceeding (+)
 

display of force gauge DS2
 

  • »Zero Set« to zero the gauge in all operating positions
  • Manufacturers calibration report is included
  • Display can be reversed for inverted use; e. g. on vertical test stand
 

reversed display of force gage DS2
 

Standard Features

  • Force measuring device for exact measuring with an accuracy of ±0.2 %
  • Overload protection: 150 % full scale (up to  5 N)
                                      200 % full scale (from 20 N)
  • For hand-held use or mounting on test stand (mounting thread 4 x M4 in back)
  • Easy to operate
  • Force gauge with easy to read LCD display
  • Ergonomically-designed, rugged die-cast aluminium housing 
  • Operates on rechargeable battery (NiMH) and/or AC adapter
  • Full set of accessories included
 

Available Models

Model Capacity
in N
Resolution Capacity
gf; kgf
Capacity
ozf; lbf
DS2-2N 0 - 2 N 0.001 N 0 - 200.0 gf 0 - 8.819 ozf
DS2-5N 0 - 5N 0.001 N 0 - 500.0 gf 0 - 17.64 ozf
DS2-20N 0 - 20 N 0.01 N 0 - 2.000 kgf 0 - 4.409 lbf
DS2-50N 0 - 50 N 0.01 N 0 - 5.000 kgf 0 - 11.02 lbf
DS2-200N 0 - 200 N 0.1 N 0 - 20.00 kgf 0 - 44.09 lbf
DS2-500N 0 - 500 N 0.1 N 0 - 50.00 kgf 0 - 110.2 lbf
DS2-1000N 0 - 1000 N 1 N 0 - 100.0 kgf 0 - 220.5 lbf
 

Standard Accessories

Small Hook 
 

Aluminium, M6, measuring range up to 100 N
Order number: A-1

Steel, M6, measuring range from 100 N to 500 N
Order number: S-1

Steel, M6, measuring range from 500 N to 1000 N
Order number: SR-1

Flat Tip 
 

Aluminium, M6, Ø 13 mm, measuring range up to 100 N
Order number: A-2

Steel, M6, Ø 16 mm, measuring range from 100 N to 1000 N
Order number: S-2

Conical Tip 
 

Aluminium, M6, 85°, measuring range up to 100 N
Order number: A-3

Steel, M6, 85°, measuring range from 100 to 1000 N
Order number: S-3

Chisel Tip 
 

Aluminium, M6, 85°, measuring range up to 100 N
Order number: A-4

Steel, M6, 85°, measuring range from 100 N to 1000 N
Order number: S-4

Notched Tip 
 

Aluminium, M6, 90°, measuring range up to 100 N
Order number: A-5

Steel, M6, 90°, measuring range from 100 N to 1000 N
Order number: S-5

Extension Shaft 
 

Aluminium, M6, 80 mm, measuring range up to 100 N
Order number: A-6
Steel, M6, 100 mm, measuring range from 100 N to 1000 N
Order number: S-6

AC Adapter 

For 100 - 240 V AC
Order number: ADS-230
Inspection Certificate 
 

Delivery includes a manufacturers inspection certificate free of charge

Click picture for more information

 

Accessories (optional)

Z-Link 
 

Software for Data acquisition by RS 232 output
Order number: SW-10

Click picture for more information

Printer 
 

To print stored values using Mitutoyo Digimatic output.
Order number: DP-1 VR

Click picture for more information

Paper Roll 

For Printer DP-1 VR, 1 Set = 5 pieces
Order number: DP-P
Handle 
 

For easy use the force gauge can be equipped with a handle. Therefore especially higher forces can be measured more easily.
Order number: FOH-1

Click picture for more information

Clamping Tools 
 

Depending on the application we have a lot of clamping tools and clamps in our programm.

For more information click here

Large Hook 
 

Aluminium, M6, measuring range up to 100 N
Order number: A-7

Steel, M6, measuring range from 100 N to 1000 N
Order numbr: S-7

Y-Hook 
 

Aluminium, M6, measuring range up to 100 N
Order number: A-8

Steel, M6, measuring range from 100 N to 1000 N
Order number: S-8

Connecting Cable 

Analog e. g.  for connecting to a line recorder, 3 m long
Order number: CB-101
Connecting Cable 

For RS-232 interface for connecting the force gauge to a PC: Sub D9 female, 3 m long
Order number: CB-203
Connecting Cable 

For Digimatic output for connecting an Mitutoyo evaluation units, 3 m long
Order number: CB-301
Calibration Certificate 

Calibration certificate with calibration report is optional available.
 

Delivery Includes

 

scope of delivery force gauge DS2: Force gauge with carrying case, standard accessories, AC adapter, manufacturers calibration report, operating instruction in german or english as requested
 

Dimensions

DimensionsFor PDF-file please
click picture
 

Specifications

Measuring principle: Bidirectional force sensor with strain gauge
Displacement: Up to DS2-5: approx. 0.5 mm
From DS2-20: approx. 0.2 mm
Accuracy: ±0.2 % Full Scale ±1 digit
Measuring units: N, gf (kgf), lbf (ozf)
Display: 4 digit, 14 mm high
Overload capacity: up to 5 N: 150 % full scale,
from 10 N: 200 % full scale,
Display flashes at110 % full scale
Plug gauge: M6 male thread
Measuring frequency: 1000 times/sec (switchable to 30 times/sec)
Zero adjustment: 10 % full scale
A/D converter: 16 bit
Output signal: RS 232 C (8, 1, N, 19200),
analog ±1 V DC,
Mitutoyo Digimatic
Temperature range: 5 - 45 °C
Air humidity: 85 % RH max
Low battery indicator: Display flashes
Power supply: Rechargeable NiMH batteries (approx. 10 h continous use, approx. 10 h charging
time and 500 charging and discharging cycles) and/or 230 V AC adapter
Mounting threads
for test stand:
4 x M4, Depth 8 mm
Housing material: Die-cast aluminium
Dimensions: 188 x 66 x 33 mm (LxWxH)
Weight, net (gross): Approx. 420 g (approx. 1300 g)

Sản phẩm liên quan

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Te ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Ho ...

Hans schmidt Vietnam - Ho ...

Hans schmidt Vietnam - Ho ...

Hans schmidt Vietnam - Ho ...

Hans schmidt Vietnam - Ho ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Ve ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Fo ...

Hans schmidt Vietnam - Lo ...

Hans schmidt Vietnam - Di ...

Hans schmidt Vietnam - Cl ...

Hans schmidt Vietnam - Ap ...

Hans schmidt Vietnam - Ap ...

Hans schmidt Vietnam - Fo ...